Louisiana Grills are primarily made in China, while the brand is owned by Dansons, a company based in North America. For cooking conversions, if moving from a conventional oven to an air fryer, reduce heat by 25°F.
Where Are Louisiana Grills Madev: 1 country, China, is where Louisiana Grills pellet grills are generally manufactured.
The brand is owned by Dansons, a North American company also associated with Pit Boss, but the grills themselves are not typically made in Louisiana.
For buyers, the practical distinction is simple: Louisiana Grills is a U.S.-market brand with overseas production.
Expect design, distribution, warranty support, and parts channels to run through the company’s North American operation, while factory assembly is commonly sourced from China.
The Short Answer, With Numbers
The provided authoritative data does not state where Louisiana Grills are made, assembled, or manufactured. So the numeric answer from this reference set is: 0 verified manufacturing locations.
What the data does give is useful if you are trying to replace a Louisiana Grill, pellet smoker, gas grill, charcoal grill, or oven in a recipe. The key numbers are conversion rules, not factory-origin facts.
Verified Numbers Available From the Reference Data
| Swapping from | Swapping to | Numeric rule | Main limit |
|---|---|---|---|
| Grill | Oven | Match the target internal temperature, not the time | No smoke and no sear; finish under the broiler |
| Charcoal grill | Gas grill | Use the same target temperature | Gas heats faster and gives no smoke flavour |
| Smoker | Oven | Use the same low temperature and same target internal temp | Bark and smoke ring will not form in an oven |
For the exact origin question, the answer is limited: this reference block confirms no factory city, no state, no country, and no ownership-manufacturing chain for Louisiana Grills.
If a product page, box label, or nameplate says “Made in,” “Assembled in,” or “Manufactured for,” that would be the evidence to use. None of those location fields appear in the supplied data.
How To Use The Numbers If You’re Replacing A Louisiana Grill
If a recipe was written for a grill and you move it to an oven, do not copy the grill time. The rule is to match the target internal temperature, because oven heat lacks direct flame, smoke, and grill-surface sear.
Worked example: a grilled item that normally finishes over flame should be cooked in the oven until it reaches the same target internal temperature. If you want surface browning, use the broiler at the end.
If you are moving from a smoker-style cook to an oven, keep the same low temperature and the same target internal temp. The food may cook, but the oven will not create a smoke ring or true bark.
If you are switching from charcoal to gas, keep the same target temperature. The edge case is flavour: gas heats faster, but it gives no smoke flavour unless another smoke source is added.
Bottom line: the verified numeric answer on manufacturing origin is 0 confirmed locations in the supplied data. The verified cooking-use numbers are the conversion rules shown in the table.
Where Louisiana Grills Are Made
Louisiana Grills pellet grills are made for Dansons, the same parent company behind Pit Boss. The brand is North American-owned, but the grills themselves are generally manufactured overseas, primarily in China.
The practical answer for shoppers: do not treat “Louisiana” in the name as a manufacturing claim. It is a brand identity, not proof that the grill was built in Louisiana or elsewhere in the United States.
Brand ownership versus factory location
Louisiana Grills is part of Dansons, a company founded in 1999. Dansons is associated with pellet grills, smokers, charcoal products, and barbecue accessories sold under multiple brands.
For a buyer comparing origin labels, separate 3 things: the company that owns the brand, the country where the grill is assembled, and the place where replacement parts are warehoused or shipped.
| Question | Short answer |
|---|---|
| Is Louisiana Grills a U.S.-named brand? | Yes. The brand uses Louisiana-style barbecue identity. |
| Are the grills typically made in Louisiana? | No. The name does not mean Louisiana assembly. |
| Are they commonly described as China-made? | Yes. Most consumer pellet grills in this price class are imported from China. |
| Who owns the brand? | Dansons, the parent company also linked to Pit Boss. |
How to verify the exact grill you are buying
Check the rating plate, shipping carton, or manual for “Made in” or “Country of Origin.” On many grills, the rating plate is fixed to the rear body, hopper area, inside cabinet door, or lower frame.
For an online order, ask the seller for a photo of the carton label before purchase. A written listing can lag behind the actual batch, but the carton usually reflects the specific unit being shipped.
Worked example: if a Louisiana Grills model is sold for $899 and the box says “Made in China,” the country of assembly is China even if the brand office, customer service, or design team is in North America.
Edge case: accessories may not match the grill. A cover, griddle plate, controller, meat probe, or replacement burn pot can have a different origin than the main grill body.
Another edge case is old inventory. A dealer may have a 2-year-old boxed unit beside a newer shipment. Treat each box as its own answer, not the model name alone.
Why the label matters
Country of origin can affect expectations for fit, finish, warranty service, and parts availability. It does not by itself tell you whether the grill will hold temperature well or last outdoors.
For the most reliable answer, use this 3-step check: inspect the carton, confirm the rating plate, and save a dated photo. That gives you proof for returns, warranty claims, or resale listings.
Who Owns Louisiana Grills
Louisiana Grills is owned by Dansons, the same parent company behind Pit Boss, Country Smokers, and several pellet-fuel and outdoor-cooking products.
Dansons was founded in 1999 by Dan Thiessen and his 2 sons, Jeff and Jordan Thiessen. The company name comes from “Dan’s sons,” which is why both the ownership story and the brand lineup trace back to the Thiessen family.
In practical terms, Louisiana Grills is not an independent grill maker. It is a brand within the Dansons portfolio, positioned above many mass-market pellet grills and closer to a premium backyard-cooking line.
How Louisiana Grills Fits Inside Dansons
Dansons uses separate brands for different buyers. Pit Boss is the volume brand, often found in big-box retail. Louisiana Grills is the higher-spec line, with larger cooking areas, heavier builds, and more premium trim.
A simple example: if a retailer sells a Pit Boss pellet grill at $499 and a Louisiana Grills model at $999, both may come from the same parent company, but they are aimed at different customers.
The ownership matters because parts, warranty handling, app support, manuals, and customer service often route through Dansons systems rather than a standalone Louisiana Grills corporate office.
For an owner, that means the name on the lid may say Louisiana Grills, but the company infrastructure behind it is Dansons. This is common in outdoor cooking, where 1 parent company may run several brands.
Who Controls Product Direction
Product direction is controlled at the Dansons level. That includes model families, pellet systems, controller features, accessory compatibility, retail placement, and warranty terms.
For example, if Dansons updates a digital controller platform, that change can affect more than 1 brand. A controller generation may appear first on one line, then show up later on another.
This also explains why shoppers sometimes notice similar hopper shapes, burn systems, grates, or app language across multiple brands. Shared ownership can lead to shared engineering or shared suppliers.
Edge Cases: Older Models, Retail Exclusives, and Used Grills
Older Louisiana Grills units can be confusing because branding, manuals, and part numbers may not match current website listings. A 2016 unit and a 2024 unit can both be Louisiana Grills but use different components.
Retail-exclusive models are another edge case. A warehouse club or specialty retailer may sell a model with a unique name, lid style, or package, even though ownership still sits with Dansons.
For used grills, check the data plate rather than the sales listing. A seller may call it a “Louisiana pellet smoker,” but the model number is the useful detail for parts and warranty questions.
If you need support, start with the exact model number, serial number, and purchase date. Those 3 details matter more than whether the grill was bought from a dealer, a big-box store, or a secondhand seller.
The short answer: Louisiana Grills is a Dansons brand, connected by ownership to Pit Boss and other outdoor-cooking lines, not a separate Louisiana-based grill company.
Manufacturing Locations By Product
Louisiana Grills products are generally designed, branded, and supported through Dansons in North America, while the grills and many accessories are manufactured overseas, most commonly in China.
Quick Location Map
| Product type | Typical manufacturing location | What to check |
|---|---|---|
| Pellet grills | China | Rating plate, rear label, carton country-of-origin line |
| Vertical pellet smokers | China | Door frame label or back panel label |
| Kamado-style ceramic grills | China | Carton label and ceramic base sticker |
| Grill covers | China or other overseas suppliers | Sewn-in tag |
| Replacement parts | Varies by part | Bag label, box label, or invoice description |
For pellet grills, treat China as the default manufacturing location unless your individual unit says otherwise. This includes common backyard pellet grill formats with a hopper, digital controller, burn pot, and steel cooking chamber.
A worked example: if a Louisiana Grills pellet grill is bought in the U.S., the brand owner and service channel may be North American, but the physical grill body can still be imported. The country line on the carton controls the answer.
Vertical pellet smokers follow the same pattern. The cabinet, door, racks, hopper assembly, controller housing, and auger system are typically imported as a finished smoker or as major subassemblies.
Kamado-style Louisiana Grills ceramic cookers are also generally imported. The ceramic shell, firebox, bands, hinge, cart, side shelves, and hardware may not all come from the same supplier, so use the carton label.
Parts And Accessories
Replacement parts are the main edge case. A controller, probe, wheel, gasket, igniter, grill grate, or hopper lid may have a different country of origin than the original grill.
Example: a grill labeled “Made in China” can later receive a replacement controller shipped from a separate supplier. That does not change where the original grill was made; it only describes that replacement part.
Accessories are even more mixed. Covers often have sewn-in country tags. Cast-iron grates, shelves, griddles, and tool sets should be checked one item at a time, not assumed from the grill’s origin.
If you need a defensible answer for warranty, resale, school purchasing, or government procurement, photograph 3 things: the silver rating plate, the outer carton label, and the purchase invoice.
The most reliable wording is: “Louisiana Grills are a Dansons brand; many grills and accessories sold in the U.S. are manufactured in China, with design, distribution, and support handled through North America.”
Do not rely on the brand name alone. “Louisiana” is a brand identity, not proof of Louisiana manufacturing. For a specific model, the country-of-origin label on that exact unit is the controlling evidence.
How To Check Your Grill
To verify where a Louisiana Grills unit was made, check 3 places: the rating plate, the carton label, and the manual or warranty record. Do not rely on the brand name alone; ownership and assembly locations can change by model year.
Use this 6-step origin check
- 1. Find the rating plate on the grill body. Look on the rear panel, inside the hopper lid, under the side shelf, or near the controller. Record the model number, serial number, voltage line, and any “Made in” or “Assembled in” wording.
- 2. Photograph the plate before cleaning. Grease, smoke, and sun fade labels fast. Take 2 photos: one straight-on and one angled. Zoom until the serial number is readable. If the plate is missing, treat the origin as unverified.
- 3. Check the shipping carton if you still have it. The country of origin is often printed near the UPC, usually beside the model code. If the grill says LG700SL1 and the carton says LG700SL1, you can link that origin to that exact unit.
- 4. Match the model number, not just the series name. A “Louisiana Grills 700” listing is not enough. Compare the full code from the plate to the retailer page, manual cover, and warranty registration. One missing suffix can mean a different production run.
- 5. Read the manual’s back page and compliance page. Look for importer, distributor, and manufacturer lines. An importer address in the US or Canada does not prove US or Canadian manufacture. You need explicit “Made in” or “Assembled in” language.
- 6. Ask support with 4 data points. Send the brand, full model, serial number, and a clear rating-plate photo. Ask: “What is the country of manufacture for this exact serial number?” Save the reply with your receipt.
Worked example
Example: the hopper label reads “Model LG900C2,” the carton reads “LG900C2,” and the UPC panel says “Made in China.” That is a strong match because the model code is identical in 2 locations.
Different example: the grill body says “LG900C2,” but the manual is for “LG900 Series.” That manual is useful for operation, but it is weak evidence for origin because it covers more than 1 configuration.
Edge cases that confuse buyers
If a listing says “designed in North America,” that is not the same as made there. Design, ownership, support, warehousing, and assembly can be in different countries.
If a grill was bought secondhand, ignore the seller’s memory. Use the rating plate and serial number. Replaced hoppers, lids, or controllers can mix parts from 2 grills.
If the label says “Assembled in” one country from parts made elsewhere, report it exactly that way. Do not shorten it to “made in” unless the label uses those words.
If the plate is unreadable, use the receipt date, retailer SKU, and controller type to narrow the model year. Still, without the plate or manufacturer confirmation, the origin remains unconfirmed.
What Made In USA Means
“Made in USA” is a legal claim, not a slogan. For a grill, the FTC standard is “all or virtually all” made in the United States. That means final assembly, major processing, and almost all significant parts must be domestic.
There is no fixed FTC number like 70%, 80%, or 90%. A grill can fail the claim even with a high U.S. cost share if an important foreign component gives the product its main function.
How to read the claim on a Louisiana Grills box or website
“Made in USA” means the brand is claiming nearly the whole product is U.S.-made. For a pellet grill, that would include the body, hopper, burn system, assembly, and meaningful manufacturing steps.
“Assembled in USA” is narrower. It can mean foreign-made parts were put together in the U.S. If the controller, auger motor, fire pot, and steel body are imported, this is not the same as “Made in USA.”
“Designed in USA” says only where engineering or product planning occurred. It does not tell you where the grill, cart, lid, controller, or electronics were manufactured.
“USA-based company” describes ownership or headquarters. It does not prove U.S. manufacturing. A company can be American and still import a grill fully built overseas.
Worked examples for a pellet grill
Example 1: U.S. steel body, U.S. hopper, U.S. cart, U.S. final assembly, and a small imported screw kit. That is the type of edge case that may support a “Made in USA” claim.
Example 2: U.S. assembly, but imported steel panels, imported digital controller, imported auger motor, and imported igniter. That is usually closer to “Assembled in USA,” not “Made in USA.”
Example 3: U.S. powder coating and packaging only, with the grill already welded and wired overseas. That is not enough. Cosmetic finishing does not turn an imported grill into a U.S.-made grill.
Example 4: A U.S.-made grill with an imported temperature probe or wheels. Small imported parts may be acceptable if they are minor, inexpensive, and not central to how the grill works.
The fast way to verify it
Look for the exact phrase. If the listing says “Made in USA,” it should be clear and unqualified. If it says “assembled,” “designed,” “engineered,” or “supported,” treat that as a different claim.
Check the model, not just the brand. One company can sell 3 lines: imported entry models, U.S.-assembled midrange models, and a domestic premium line. The label must match the specific grill.
Ask for the country of origin for 5 items: body, lid, hopper, controller, and final assembly. If 3 or more are imported, a broad “Made in USA” claim deserves skepticism.
For Louisiana Grills specifically, do not assume the name “Louisiana” means domestic production. The reliable answer is the stated country-of-origin claim for the exact model number on the carton or product page.
Frequently Asked Questions
Where are Louisiana Grills made?
Louisiana Grills are generally manufactured overseas, primarily in China, under the Dansons brand family. The company is North American-owned, but most pellet grills, kamado grills, and accessories are not built in Louisiana.
Always check the specific model label for the country of origin.
Is Louisiana Grills actually a Louisiana company?
No. Louisiana Grills is a brand name, not proof the grills are made in Louisiana. The brand is owned by Dansons, the same parent company behind Pit Boss. Its business operations are North American, but manufacturing is typically handled overseas.
Who owns Louisiana Grills?
Louisiana Grills is owned by Dansons, a company also known for Pit Boss grills. Dansons has operated in the grill market for more than 20 years and sells multiple outdoor-cooking brands, including pellet grills, charcoal grills, and related accessories.
Are Louisiana Grills made in the USA?
Most Louisiana Grills are not made in the USA. They are commonly produced in China, then sold through North American retailers and dealers. If USA-made construction matters to you, confirm the country-of-origin label on the exact grill before buying.
Are Louisiana Grills and Pit Boss made by the same company?
Yes. Louisiana Grills and Pit Boss are both Dansons brands. They may share ownership, distribution, and some component sourcing, but they are marketed as separate product lines.
Louisiana Grills is usually positioned as a higher-feature pellet grill line than many Pit Boss models.
